Harbor Floor
Stand Adapter
The Floor Stand Adapter makes your Harbor Camera compatible with any third-party floor stand that has a 1/4-20 mounting thread.
Note: floor stand NOT included
Set Up Instructions
1. Remove Black Foot on Your Camera
Remove the black foot that comes with the Camera by turning it counter-clockwise. You can use this foot if you later choose to wall-mount or set the Camera on a shelf.
2. Set up Your Floor Stand
Set up your floor stand. We suggest sandwiching the floor stand between the crib and a wall, to prevent risk of the floor stand tipping over.
3. Attach the Adapter to Your Stand
Attach the floor stand adapter to the floor stand using the 1/4-20 thread and turning clockwise till it is secure.
4. Route Your Cable
Route the cable through the floor stand adapter's internal grooves ensuring the cable is flat within the bottom of the groove.
5. Secure Cable with Velcro Straps
Use the provided velcro straps to secure the cable to the pole of the floor stand.
6. Mount the Camera to Your Stand
Mount the Camera onto the floor stand adapter by turning clockwise until you feel the Camera is tightly and securely locked. Then plug in your cable.
7. Onboard Your Harbor Camera
Onboard your Camera and monitor following the instructions HERE.
8. Adjust Your Camera Angle
Adjust the Camera for viewing. When doing this, make sure to hold the Camera base firmly.
-
Harbor Camera
The black foot of your Camera unscrews easily and is replaced with your Floor Stand Adapter.
-
Floor Stand Adapter
Easily fits any third-party floor stand with a 1/4-20 mounting thread.
-
Built-In Cable Route
Designed with a cable route to keep your cords organized and secure.
FAQS
What type of floor stands is the Harbor Camera compatible with?
The Floor Stand Adapter makes the Harbor Camera compatible with floor stands that have a 1/4-20 screw thread mounting option. This is the most common option many online, third-party floor stands come with. Please send us a message at support@harbor.co if you want to check with us before your purchase.
Is the Harbor Camera compatible with Nanit floor stand?
No.
Is using a floor stand safe?
We strongly recommend parents to use their own judgement for their baby monitor setup. Mounting directly to the wall or placing the Camera on a high shelf out of baby's reach still remain the safest options.
If using a floor stand, we also suggest sandwiching it between the wall and crib to reduce the risk of tipping, if accidentally knocked over.
What about the stands that attach directly to the cribs?
We never recommend using crip-on clib stands/arms as the Camera is too close to baby. For safety reasons, the Camera should be at least 3' away at all times.